BORA Classic 2.0 Surface Induction and Tepan Set with Cooktop Extractor (CKA2FIT) - Bora

BORA Classic 2.0 CKASE2 cooktop extractor system, top view as installed, included in the set

roll over the image to zoom in


BORA Classic 2.0 Surface Induction and Tepan Set with Cooktop Extractor (CKA2FIT)
Bora

This set combines a fully flush BORA Classic 2.0 CKFI surface induction cooktop and the CKT Tepan stainless steel grill with the CKASE2 cooktop extractor system set, so you have induction and plancha-style cooking with extraction at pan level, all controlled from one sControl+ panel.

Price shown is for the complete set at BORA's UK list price for the CKA2FIT set. Other finishes are listed as options at their own BORA list prices.

What is in the set

  • 1 × BORA Classic 2.0 cooktop extractor system set (CKASE2)
  • 1 × BORA Classic 2.0 surface induction cooktop (CKFI)
  • 1 × BORA Classic 2.0 Tepan stainless steel grill (CKT)

Set versions

CKA2FITStainless steel extractor: 1 × CKASE2, 1 × CKFI, 1 × CKT, £6,252.00 inc VAT

CKASE2 extractor system set

  • Intuitive, multi-coloured sControl+ operating panel
  • Direct function selection
  • Minimum volume
  • Integrated drip tray
  • Stainless steel grease filter
  • Compact size

CKASE2 contents: 1 × Classic cooktop extractor CKA2/CKA2AB, 1 × shallow silencer USDF, 1 × plinth fan EC ULS, 1 × shallow, vertical Ecotube with 90° bend EFBV90/1, 1 × shallow, round, straight Ecotube transition piece EFRG/1, 1 × shallow, round Ecotube transition piece with offset 110 mm EFRV110/1, 1 × shallow Ecotube duct with partition 375 mm EFS375/1, 2 × shallow Ecotube duct connector EFV/1, 7 × Ecotube flat seal EFD/1, 1 × Ecotube round seal ERD/1.

CKFI surface induction cooktop

  • Oversized surface induction cooking zones
  • Compact size
  • Minimalist design
  • Demo mode
Supply voltage220–240 V
Frequency50–60 Hz
Maximum power consumption3680 W
Maximum power rating3680 W
Fuse protection1 × 16 A
Dimensions (width × depth × height)327 × 515 × 58 mm
Surface materialGlass ceramic
Cooktop power levels1–9, P
Size of front cooking zone230 × 230 mm
Size of rear cooking zone230 × 230 mm
Front cooking zone output2100 W
Rear cooking zone output2100 W
Front cooking zone output on power setting3680 W
Rear cooking zone output on power setting3680 W
Cooktop power supply cable1.5 m

CKT Tepan grill

  • Compact size
  • Minimalist design
  • Precise temperature control
  • Precise temperature indicator
  • Rapid heat-up
  • Cleaning-optimised design
  • Demo mode
Supply voltage220–240 V
Frequency50–60 Hz
Maximum power consumption3500 W
Maximum power rating3500 W
Fuse protection1 × 16 A
Dimensions (width × depth × height)327 × 515 × 73 mm
Surface materialBrushed stainless steel
Temperature control range150–230 °C, 250 °C (1–9, P)
Size of front cooking zone250 × 220 mm
Size of rear cooking zone250 × 220 mm
Size of bridged cooking zones250 × 440 mm
Front cooking zone output1750 W
Rear cooking zone output1750 W
Cooking zone output when bridged3500 W

Planning and installation

  • Minimum base unit width 80cm for one extractor and two cooktops
  • Central components for the entire BORA Classic 2.0 system (neither system nor individual components can be operated without a cooktop extractor)
  • The system is operated using the operating panel on the cooktop extractor
  • Suitable for use with all BORA Classic 2.0 cooktops
  • Up to 2 cooktops can be connected to each cooktop extractor
  • Suitable for use as a recirculation or exhaust system
  • Customisable worktop height and depth
  • Flush installation or surface mounting possible
  • Air channelling possible to the right or left
  • Suitable for use with all BORA universal fans
  • Long or complex exhaust channels possible using an additional fan module

The set as listed by BORA is for exhaust air (ducted) extraction. The duct run beyond the included components, or a BORA air purification box if you need recirculation, is planned and quoted for your kitchen.

Manufacturer information: BORA Classic 2.0.

Every hob we sell is planned with you before it is ordered, so the cut-out, electrics and extraction are right first time. Visit our Leeds showroom, call 0113 266 0096 or email info@bmfonline.co.uk. See also our kitchen planning guide.

Price shown includes VAT.


Ex VAT  £5,210.00Inc VAT  £6,252.00
Earn0
reward points


BORA Classic 2.0 CKASE2 cooktop extractor system, top view as installed, included in the set

Send this to a friend

BORA Classic 2.0 Surface Induction and Tepan Set with Cooktop Extractor (CKA2FIT)


    What our customers say

    I Cannot Recommend Highly Enough

    We used BMF a number of years ago in our previous house and got first class service and product. We have just moved house and have gone back to Sam and Ben at BMF, and had 2 very high-end stoves installed. As per our first stove absolutely top notch service and products. I would very strongly recommend Ben and his team having installed 3 stoves for us, in a very tidy and professional way. I cannot recommend highly enough.  cheers guys

    Brent Dransfield

    Not one for writing reviews yet I felt I had to thank the team at BMF for my fabulous new kitchen. I love it! Quite an exceptional experience from beginning to end. In particular, special shout out and hooray to Tony, who listened, engaged, offered some super clever design ideas and helped me to convey my own which was an achievement in itself. Currently sat in what was promised, revelling in the absolute delight of both the process and results, completely exceeding expectations and proving it can be done stress-free.

    THANK-YOU again and totally be back in touch for the wood burner.

    Helen Alexander

    Awesome job, absolutely delighted with our new kitchen. We went to the showroom with loads of ideas about what we wanted to achieve but the product knowledge and technical know how of the team at BMF was invaluable. This wasn’t a small job, there were structural changes within and building works to the outside wall to accommodate new doors. BMF dealt with it all, working to a budget, engaging a structural engineer and project managing third-party contractors. They even tweaked the design midway through at their own cost as they found a way to fit a larger kitchen island. NICE to find a firm that values their end product over their profit margin!!

    I Meek

    We used BMF Interiors to supply and install a wood burning stove. I dealt with Sam Freeman and she was absolutely fantastic. Really helpful and thorough; going beyond what she needed to do to help me decide what else to do with the hearth and fireplace before using BMF. She even spoke to the builders who knocked the fireplace through to guide them with a few things. The installers were great too. Plus we got free wood for emailing through the pictures of the finished fireplace – great bonus! I can’t recommend them highly enough. Thank you Sam.

    Emma T

    Blog, News & Articles