Gas Stoves

9  Products


Balanced flue and conventional flue gas stoves from Barbas Bellfires, for natural gas or LPG. Whether you have a chimney, an outside wall or neither, our Leeds team can help you find the right fire. Looking for an inset, corner or three-sided gas fire? See our gas fires from Gazco and Ortal.

Choosing a gas fire

A modern gas fire gives instant, controllable heat and a realistic flame without the work of a log fire. Start with your home: the flue you have decides which fires will suit.

Bellfires Box 45

Balanced flue gas stove, 4.4kWEnergy class A

View

Bellfires Box 45/59 Panoramic

Balanced flue with panoramic glassA wider view of the flames

View

Bellfires Box 55

Balanced flue gas stove, 5.0kWEnergy class B

View

Bellfires Box 65

Balanced flue gas stove, 5.3kWEnergy class B

View

Gazco Studio 1

Glass-fronted inset fire, 4.1kWConventional flue

View

Gazco Studio 2

Glass-fronted inset fire, 6.2kWConventional flue

View

Browse by brand: Bellfires and Gazco.

Gas fires compared

ModelFlue typeHeat outputEnergy class
Bellfires Box 45Balanced flue4.4kWA
Bellfires Box 55Balanced flue5.0kWB
Bellfires Box 65Balanced flue5.3kWB
Gazco Studio 1Conventional flue4.1kWE
Gazco Studio 2Conventional flue6.2kWC

Natural gas, manufacturer figures. Bellfires figures are nominal heat output; Gazco figures are maximum heat output for the glass-fronted conventional flue models. Outputs on LPG differ slightly.

Balanced flue or conventional flue?

A balanced flue fire is room-sealed: a twin-walled concentric pipe draws combustion air from outside and carries the flue gases away through an outside wall or the roof. The Bellfires Box range uses a 100/150mm concentric flue, which is why it can go in rooms with no chimney.

A conventional flue fire uses a chimney or a prefabricated flue. Gazco's glass-fronted Studio fires connect to a 5-inch (127mm) flue liner or gas vent system, and Gazco states that the Studio 1 does not normally need an additional air vent.

Reading the figures

Nominal output is what the fire gives on full, and most fires also turn down: the Box 45, for example, has an indicative minimum output of 1.9kW. A higher energy class means more of the gas you pay for becomes heat in the room. For a room that is already well heated, a smaller, efficient fire is often the more comfortable choice.

Installation and safety

  • Every gas fire must be installed by a Gas Safe registered engineer, and an annual service is recommended.
  • Your engineer will confirm where a balanced flue terminal can go, as there are minimum distances from windows, doors and boundaries.
  • In England, a carbon monoxide alarm is required in any room where a new fixed combustion appliance, other than a gas cooker, is installed.
  • Each fire is set up for natural gas or LPG, so tell us which supply you have before ordering.

Visit our Leeds showroom

See our gas fires in person at our showroom at 248 Meanwood Road, Leeds LS7 2HZ. Visits are by appointment, so a member of our team can give you their full attention. Bring your measurements and photos of the room, and we will help you narrow down the choice.

Gas fire questions

Can I have a gas fire without a chimney?

Often, yes. Balanced flue gas fires and stoves, such as the Bellfires Box 45, vent through an outside wall, so a traditional chimney is not required.

What is the difference between a balanced flue and a conventional flue gas fire?

A balanced flue fire is room-sealed and takes air from outside through a concentric pipe in an outside wall or roof, so no chimney is needed. A conventional flue fire uses a chimney or a prefabricated flue.

Can your gas fires run on LPG?

Yes. The Bellfires Box and Gazco Studio fires are available for natural gas or LPG. Each fire is set up for one gas type, so tell us which supply you have before ordering.

Who can install a gas fire?

Only a Gas Safe registered engineer. An annual service is recommended to keep the fire running safely and efficiently.

Do I need a carbon monoxide alarm with a gas fire?

Yes. In England, a carbon monoxide alarm is required in any room where a new fixed combustion appliance, other than a gas cooker, is installed.

Where can I see gas fires in Leeds?

At our showroom at 248 Meanwood Road, Leeds LS7 2HZ. Visits are by appointment, so call 0113 266 0096 or email info@bmfonline.co.uk to book.

Need help choosing your gas fire?

Speak to the BMF team on 0113 266 0096 or email info@bmfonline.co.uk. Our phone lines are open 9am to 4pm, Monday to Friday, and we can help you check sizes, room requirements and what to order.

Specifications are manufacturer figures; check each product page before ordering.