Add To Your WishlistLacanche Beaune 900mm Wide Classic Range Cooker

Add To Your WishlistLacanche Beaune 900mm Wide Classic Range Cooker





Available - Please check Shipping Times Below

Sorry we're out of stock!

We can let you know when it's available again, just enter your email address below.


  • Product Description

    The Lacanche Beaune Classic range cooker offers a host of exciting features and options to customise your look.  

    Available Options 

    • Six burner classic gas hob or electric induction with 6 rings
    • Ovens: 1 x 2.65kw/ 65 litre dual function convection/static oven with grill & 1 x 3.5 kw/ 52 Litre gas oven
    • Ovens: 1 x 2.65 kw/ 65 Litre dual function convection/static electric oven with grill & 1 x 2.2kw / 56 Litre static electric oven with grill 
    • Ovens: 1 x 2.65 kw/ 65 Litre dual function convection/static electric oven with grill & 1 x 2.65kw / 51 litre convection oven with grill
    • 30 colour choices 
    • Trim choices : Brass, Chrome, Chrome Matt, Brushed Steel or Nickel 
    • 5 Plinth heights from 900mm to 974mm high 

    All prices include VAT and a two person delivery service ( approved Third Party delivery company) to a ground floor location and unpackaged for inspection.  

    A delivery survey will need to be completed once your order is in process.

    These products are made to order so please ensure your configuration is correct and suitable for your installation before proceeding with your order.   Lead times are confirmed by Lacanche once the order is in progress.  

    Please call 0113 2660096 if you wish to discuss this product range and options available.



  • Technical Information

    lacanche-colours.png

    Trim Colours 


  • Accessories

    Installation & Commissioning Your Lacanche Range Cooker

    Installation and Commissioning should be in accordance with the manufacturer’s Installer’s Manual and also current Gas Safe and IEE regulations. In order that installation and commissioning is carried out correctly you should use a suitable qualified and Gas Safe registered engineer. Your local Lacanche stockists can advise. The appropriate installation guidance for your cooker will be sent with the order acknowledgement.

    Note: COMMISSIONING IS CRUCIAL for the correct operation of your Lacanche. Failure to have your Lacanche commissioned correctly will result in over/under performance of burners and ovens and inconsistent temperatures.

    Power Supply/Services

    After ordering your Lacanche range cooker information will be sent to you detailing what services you will require to power the cooker.

    Electricity

    Electric feeds will be standard single phase 230 volt supply. On some larger models including many electric features, two such supplies may be required and this will be notified in the information sent to you after placing your order. On request, Lacanche range cookers can be built for three phase electricity.

    Gas

    Information on the gas power/requirement of your cooker will be provided after your order has been placed. We offer the appropriate flexihose for the type of gas (LPG or Natural Gas), which is designed to plug into a female half inch / 15mm bayonet fitting on site (location to be advised in post order confirmation).

    Building-In Guidance

    When the appliance is being built into a run of units a gap of 5mm must be maintained either side of the appliance. The stainless steel hob of the appliance should not be lower than the adjoining worktops and the worktops can butt up to the hob.

    Lacanche range cookers are designed to sit proud of the adjacent units. Units adjacent to the cooker should not sit flush or proud of the cooker doors (including oven, simmer oven and cupboard doors), but should sit flush with the main body of the cooker, for side opening cupboard or simmer oven doors to open wide enough to insert or remove shelves.

    If the furniture next to the range is deeper than 595mm, the cooker will need to be moved forward. The gap at the rear of the cooker can be filled by using the Lacanche Back Infill Panel.

    For cookers situated in confined spaces (e.g. inglenooks) with the gas oven, or with wall tiles on the back wall behind and above the cooker, we recommend using the island spacer. Wall units that are placed to the left and the right of the cooker must be a minimum distance of 450mm above the hob on both sides.

    Wall units or over mantles that are at worktop height to the left or the right of the hob must be a minimum distance of 100mm from the sides of the hob top.

    Any combustible materials directly above the cooker must be a minimum of 750mm from the top of the cooker, and the minimum height of an over mantle is 750mm.

    It is advisable to have a wipe clean surface on the wall behind the cooker such as our stainless steel backsplashes.

    The above dimensions must be adhered to. FdeF Limited is not responsible for degradation of paintwork or material adjoining the cooker.

  • Delivery Lead Time and Information